K frame revolvers are larger than your typical J-frame revolvers. While the stock synthetic grip might seem comfortable at the beginning, it’s not the best when it comes to longevity.
That’s why you might find people looking for the best K frame grips more often. If you are also in the same boat and looking for a fresh pair of grips, you have ventured in the right place. Without further ado, let’s start.
Best Flip Up Scope Covers – [Editor’s Pick]
1. VZ K/L-Frame Tactical Diamond Round Bottom Grip
VZ Grips are one of the best gun grip makers in the market. They make gun grips for tons of guns. Including the famous K-Frame revolvers. The Diamond bottom grips are available in tons of different colors.
The diamond pattern on the grips are extremely comfortable. The G10 material is extremely comfortable. As this gun grip covers the bottom of your gun as well, the entire holding area of your gun will be protected.
Unlike some other poorly made grips where they use different materials in different colors, you will not find anything like that present here. It’s a good thing for people that want to mix and match the grips.
Where is this grip made?
The grips are made in the USA. From machining to finishing, the grips are made in the USA.
Will this grip fit the Taurus 627 Tracker?
No, it won’t. This set of grips are made for Smith and Wesson K/L frame guns.
Will this fit Ruger SP 101?
No, it won’t. It’s not made for that gun.
2. S&W K/L Frame Square Butt Revolver Grips
HandiCraftGrips are known for making great looking grips for a lot of pistols and revolvers. They use a lot of material to work with. Things like silicone rubber, G10 and many others. This one is however made out of hardwood.
The stock material is excellent and it’s grippy a lot as well. While G10 is quite nice to hold on to and grippy as well, this one isn’t far off either. HandiCraftGrips are quite good at their job.
The longevity of the grips isn’t half bad either. Unless it comes into some sort of wooden calamity, it won’t face any issues whatsoever and you can use it for as long as you possibly want to.
Will this fit the Taurus Model 65?
No, it won’t. You will need to buy grips that are made for that gun instead.
Will installing them be hard?
No, not at all. The installation process is fairly simple and straightforward. You can easily install this yourself without any gunsmith.
Is this 100% handmade?
No, it’s not. There are some tools and machines that were used. But it’s mostly hand crafted.
3. Pachmayr S&W Grips for K and L frame Round Butt
While square butt grips are quite good, some might prefer the feel of the rounded butt grips. For those, Pachmayr got the right thing for you. This pair of grips is made out of rubber.
The pattern on this rubber material is done through CNC machining. The machining looks perfect. To help you have a better grip, you will find finger grooves on the set. They are made for both left and right handed users.
Pachmayr may not be as famous as VZ grips to the public, but they are quite reliable as a brand. Don’t worry, you are not getting duped or getting poorly made grips by any means.
Will this fit S&W Model 67 K Frame round butt?
Yes, it will. This grip shares the same installation process in all K frame guns.
Will this fit Rossi 357 Mag?
The Rossi 357 Mag uses the same K-frame pattern. Yes, it should work on that gun as well.
Does it come with the needed screw for installing it on the gun?
Yes, it comes with the necessary Torx screw to install on the gun.
4. Hogue K and L Round Butt Rubber Grip
When it comes to grips, Hogue makes some of the best out there. Besides rubber, they also use other materials as well. But this one is made for K and L frame handguns made by S&W.
Rubber is grippy by nature, but the way Hogue handled this material makes it extra grippy without coming as sticky. Sticky grips are not a good thing at all. This grip is ambidextrous and you can use it while wearing gloves as well.
The bottom of the grip is not square style like other grips. The round butt may be a good thing for most holster users. If you are after the best rubber grips for K-Frame pistols, then it doesn’t get better than this.
What kind of logo do these grips have?
They have Hogue’s logo. Instead of S&W logo, Hogue went with their own. It’s not a bad thing either in my book.
Will this fit Taurus Model 65?
At stock? No, it won’t. You can make it work with slight modification but that’s totally not worth it. Rather use grips made for that gun specifically.
What does conversion kit mean in this grip?
So, basically it converts the square grip into a round one. If you are not interested in keeping your square butt of the gun, then you can use this to make the butt round.
5. Hogue 19167 S&W K/L Round Butt Grips
This kit from Hogue is also a conversion kit that will turn your square butt K frame into a round butt K frame. The color and pattern of this grip looks a lot like damascus steel. But it’s not made out of damascus in case you are wondering about that.
The gips are made out of G10. It’s a composite material that is more durable than regular plastic and fiberglass. G10 is widely used in making grips. The main attraction of this grip is the texture.
They call it G-Mascus finish in black/gray. When you grip it, you won’t feel any stickiness on your fingers or palm either. The texture is very well designed to have a good grip on your hand with or without gloves. It is also an ambidextrous design. You can hold it with any hand if you want to.
Where is this made?
The grip is designed, machined, and assembled in the USA.
Is it made from wood-like material?
It’s not. It’s not hardwood or plywood. G10 is a composite plastic material.
Will this fit an N frame?
Not without a bit of tweaking. If you are not comfortable with modifying a bit things, then you shouldn’t get this for your N frame pistol.
How To Choose The Best Grip For K-Frame Pistols?
Now that you know what are some of the best K frame grips, how do you select one from the list? Grips are mostly subjective items. Objectively, you can say this grip is better than the other one. But that better grip might not be the best choice for you.
What I mean is, hardwood is a durable material but it’s hard. No, not as a pun but literally hard. And that hard surface might not be the first choice for many.
As for rubber, the softer material caters to most users. But it might not be the best thing for hunting as it can stick to your palm if it’s poorly made. But the ones that I mentioned here aren’t poorly made at all.
The point is, you will need to find out what kind of material is your mojo. If you like one, then you definitely should get the one that you like.
Well that’s about it. These are some of the best K-Frame grips that you can buy right now. I know there are lots of other grips available in the market, but they are all not that good for you or the gun. Some may not be as strong or durable as others either.
With that said, that’s all for now. Thanks for reading. I hope you found the read useful and fun. I will see you on the next one. Till then, take care and have fun.
Hi, I’m Brent Hansford. A writer turned hunter & now sharing my love for the sport through writing. As I practically breathe weapons, I firmly believe I’m capable of providing you with new knowledge about firearms and hunting. My mission is to help more people get better at hunting & master the weapons. Let me help with unleashing the beast within you!